Spray Foam Insulation Edgartown MA - Quick Facts
Local energy code in Edgartown
- Edgartown is a Stretch Code community - the statewide baseline for new construction and major renovations. IECC Climate Zone 5A.
- Massachusetts has three energy-code levels - base (2021 IECC), Stretch, and Specialized (Opt-In) - and Edgartown is on the Stretch Code.
Insulation & air sealing in Edgartown
- Spray foam is one of the fastest ways to hit the 3.0 ACH50 blower door target and the HERS 42/45 scores required in Edgartown.
- Envelope R-values follow IECC Climate Zone 5A (roughly R-49 to R-60 attic and R-20+ walls).
- Open-cell and closed-cell assemblies are evaluated during HERS plan review; as RESNET raters, not an insulation contractor, we give unbiased guidance on where R-value and air-sealing dollars move your score most.
Mass Save rebates for Edgartown (2026)
- Better air sealing and insulation move projects into higher Mass Save tiers - up to $25,000 for a new all-electric single-family home and up to $30,000 (Level 2) for all-electric renovations - verified by a RESNET-certified HERS rater.
RESNET-certified · 15,000+ ratings completed · 5.0 stars across 136 Google reviews · (617) 501-6788
Spray Foam Insulation Installer in Edgartown, MA
Whether you are building new or upgrading an older Edgartown home, the right insulation makes the difference. We install spray foam for Edgartown homeowners and builders, improving comfort and cutting energy bills through better insulation and air sealing, from material selection through code sign-off.
We Install Spray Foam in Edgartown
Home Energy Efficiency Consultants installs spray foam insulation for Edgartown homeowners, builders and contractors. We are also certified HERS raters, so the same company that installs your foam can run the blower door test and the HERS rating your permit may need.
- Where we install it: attics and roof lines, rim joists, exterior walls, kneewalls, basements and crawl spaces.
- How a job runs: we look at the house, give you a written scope and price, install the foam, then test the results.
- Why one team helps: the people who sealed the house are the people who test it, so air leaks found on the blower door test get fixed before the final rating.
Our Somerville office at 519 Broadway, Somerville serves Edgartown. Request a spray foam quote or call 617-501-6788.
Choosing Between Open- and Closed-Cell Foam
Spray foam comes in two families, and the right choice shapes both performance and cost on a Edgartown project.
Closed-Cell Spray Foam
Dense and rigid at roughly R-6 to R-7 per inch — the highest R-value of common insulation. It also acts as an air and vapor barrier and adds stiffness, making it ideal for rim joists, basements, crawlspaces, and roof decks in Edgartown homes.
Open-Cell Spray Foam
Lighter and vapor-permeable at about R-3.5 to R-3.8 per inch. It expands to fill irregular cavities, seals air leaks, and dampens sound — a strong choice for interior walls and attics where drying potential matters.
Insulation Types & R-Values Per Inch
R-value measures resistance to heat flow — higher is better. Here is how the insulation materials used on Edgartown, Edgartown projects compare per inch of thickness.
Fiberglass blown-in
Loose-fill for open attic floors; fast to install and settles into an even blanket over large horizontal areas.
EPS rigid board
Expanded polystyrene; the most affordable rigid foam, used for continuous exterior and below-grade insulation.
Mineral wool (rock wool)
Dense, naturally fire-resistant and water-repellent batts or boards with excellent sound control; keeps its R-value when wet.
Fiberglass batts
The most common and economical insulation; must be cut and fitted carefully because gaps and compression sharply reduce real-world performance.
Open-cell spray foam
Lighter and vapor-permeable; expands fully to fill irregular cavities, seals air leaks and dampens sound. A common choice for interior walls and vented attics.
Closed-cell spray foam
The highest R-value of any common insulation; also acts as an air and vapor barrier and adds structural rigidity. Ideal for rim joists, basements, crawlspaces and unvented roof decks.
XPS rigid board
Extruded polystyrene; moisture-resistant rigid board common under slabs and on foundation walls.
Cellulose (dense-pack)
Recycled paper fiber treated for fire and pests; dense-packs into closed wall cavities, making it ideal for retrofits.
Wood fiber
Renewable, carbon-storing batts and boards with strong sound dampening and vapor-open performance.
Polyiso rigid board
The highest-R rigid foam board; foil-faced and used for continuous exterior insulation to stop thermal bridging.
Common Spray Foam Applications in Edgartown
Basement & foundation walls
Closed-cell foam controls moisture and adds R-value below grade.
Exterior walls
Foam fills stud cavities completely, eliminating the gaps that reduce batt performance.
Crawlspaces
Encapsulating a crawlspace with foam stops ground moisture and cold floors above.
Rim & band joists
A major air-leak point where the foundation meets framing; closed-cell foam seals and insulates it.
Garage ceilings
Insulating below living space keeps floors warm and blocks fumes.
Serving Edgartown and the Surrounding Area
Serving Edgartown and the rest of Edgartown, we tailor every insulation plan to the local building stock — a mix of colonials, capes, ranches, and newer construction — and to the demands of IECC Climate Zone 5A.
How to Vet a Spray Foam Contractor in Edgartown
Spray foam involves chemical reactions and strict safety steps, so the installer matters. In Edgartown, look for a contractor who:
- Manufacturer-certified to install specific foam systems and keep warranties valid
- Carries general liability and workers’ compensation coverage
- Documents R-values and provides what you need for code sign-off
- Uses the correct foam type and thickness for each assembly to avoid off-ratio foam
- Follows OSHA safety practices with proper ventilation and respirators during spraying
- Knows Massachusetts code, including ignition and thermal barrier requirements
What the Massachusetts Code Requires
Edgartown falls in IECC Climate Zone 5A. New and renovated homes must meet these minimum insulation levels under the Massachusetts energy code.
| Assembly | Minimum R-value (Zone 5) |
|---|---|
| Wood-frame walls | R-20, or R-13 cavity + R-5 continuous |
| Ceilings / attics | R-49 to R-60 |
| Floors over unconditioned space | R-30 |
| Basement walls | R-15 continuous or R-19 cavity |
| Crawlspace walls | R-15 continuous or R-19 cavity |
| Slab edge (heated) | R-10, 2 ft deep |
How a Flash-and-Fill Wall Hits Its R-Value Target
One of the most cost-effective ways to reach a demanding wall R-value is to pair a thin layer of closed-cell foam with a less expensive filler. A first pass of closed-cell is sprayed tight against the sheathing, and the remainder of the cavity is completed with open-cell foam, dense-pack cellulose, or a batt.
The Flash — Closed-Cell
That initial closed-cell pass — placed tight to the sheathing — provides the air barrier and the vapor control the assembly needs, and at about R-6.5 per inch a two-inch layer adds roughly R-13.
The Fill
The remaining cavity is filled with a budget-friendly material such as open-cell foam or dense-pack cellulose to complete the R-value.
Worked Example — R-30 Wall
A common recipe for a Zone 5 R-30 wall in a 2×6 cavity: about 2 inches of closed-cell (≈ R-13) against the sheathing, then roughly 4.5–5 inches of open-cell or dense-pack (≈ R-16–18), for a combined R-29 to R-31.
The assembly stays dry because the vapor-control layer is on the cold side, holding the sheathing above the dew point; under-flashing that layer for our climate zone is the mistake to avoid.
Spray Foam Work by Our Crew
Real photos from our spray foam insulation jobs in Massachusetts.
Spray Foam Facts for Edgartown Homeowners
Open-cell or closed-cell: which spray foam fits a Edgartown home?
Open-cell foam is light and vapor-permeable, at roughly R-3.6 per inch, and works well in above-grade walls and rooflines. Closed-cell foam is dense, at roughly R-6 per inch, and acts as a vapor retarder, so it is the better choice for rim joists, basement walls and anywhere moisture is a concern. The U.S. Department of Energy notes open-cell foam should not be used below ground level, and its Building America guide recommends at least 1.5 inches of closed-cell foam in cold-climate hybrid walls. Many Edgartown jobs use both.
Are there rebates for insulating a home in Edgartown?
Mass Save offers 75–100% off approved insulation and air sealing improvements for 1- to 4-unit homes, plus 0% HEAT Loan financing of up to $25,000 for qualifying upgrades. Whether a specific spray foam measure qualifies depends on the program rules, so confirm before you start. The federal Energy Efficient Home Improvement Credit (25C) only covered property placed in service through 2025, so it no longer applies to new work.
Will spray foam lower heating bills in a Edgartown home?
ENERGY STAR estimates homeowners save an average of 15% on heating and cooling costs, or about 11% on total energy costs, by air sealing and adding insulation in attics, floors over crawl spaces and basements. Spray foam does both jobs at once. Actual savings in Edgartown depend on how leaky the house is to start, which is why we measure it with a blower door test before and after the work.
Is the house off-limits during a spray foam job in Edgartown?
Yes, plan to be out. The EPA advises occupants to vacate during spray foam application and to wait until the foam has cured and the space has been ventilated and cleaned. Some manufacturers recommend about 24 hours before re-entry for professional two-component systems; we follow the specific product's guidance and tell you the exact timing before the job.
Which energy code applies to renovations in Edgartown?
Edgartown follows the Stretch Code (effective 7/1/2021). For additions, gut renovations and new homes that means meeting stricter insulation and air-leakage targets, often verified with a blower door test or a HERS rating. Our Somerville (519 Broadway) office handles Edgartown jobs and can test the house with a blower door before and after the foam goes in.
Sources: U.S. Department of Energy (Building America Spray Foam Guide; Energy Saver), ENERGY STAR, Mass Save, IRS, U.S. EPA.
Spray Foam Types, R-Values and Vapor Control for Edgartown Homes
| Open-cell (about 0.5 lb density) | Closed-cell (about 2 lb density) | |
|---|---|---|
| R-value | About R-3.6 per inch | About R-6 per inch |
| Air barrier | Yes | Yes |
| Moisture vapor | Vapor-permeable (about 5–10 perms at 5 in.) | Class II vapor retarder (under 1 perm at 2 in.) |
| Below grade / basements | Not recommended | Yes |
| Adds wall strength | No | Yes, increases racking strength |
| Typical uses | Above-grade walls, rooflines, sound control | Foundation walls, rim joists, sills, cold-climate walls |
| Cost | Lower | Higher |
What R-value can I expect from spray foam in standard framing?
Using DOE's typical values of about R-3.6 per inch for open-cell and R-6 per inch for closed-cell: a full 3.5-inch 2x4 cavity is about R-13 with open-cell or about R-21 with closed-cell, and a 5.5-inch 2x6 cavity is about R-20 with open-cell. Closed-cell is often sprayed 2 to 3 inches deep (about R-12 to R-18) and paired with another insulation. Because foam also seals air leaks, it usually performs better than its R-value alone suggests.
Do I need drywall over spray foam?
In most cases, yes. The residential building code (IRC R316.4) requires foam plastic to be separated from living space by a thermal barrier of at least 1/2-inch drywall or an approved equivalent. In attics and crawl spaces entered only for service, an ignition barrier such as 1/4-inch plywood, 3/8-inch drywall or 1.5 inches of mineral fiber may be used instead, unless the specific foam product is approved to be left exposed. We confirm which applies before the job.
How does spray foam affect ice dams?
Ice dams form when heat escaping from the house warms the roof deck, melting snow that refreezes at the colder eaves. Massachusetts and DOE guidance both put air sealing the attic first, followed by insulation. Spray foam does both: on the attic floor it stops warm air from reaching the roof, and sprayed under the roof deck it creates an unvented, conditioned attic. It works best with a blower door test to find the leaks first.
Does closed-cell spray foam make walls stronger?
Closed-cell foam is rigid once cured, and the Department of Energy's Building America guide reports that it substantially increases the racking strength of frame walls when used in the stud cavities. Open-cell foam is soft and flexible and does not add meaningful strength.
Can I spray foam the foundation walls of my Edgartown home?
Yes, with closed-cell foam. Department of Energy guidance calls for closed-cell spray foam on the inside of the foundation wall and along the sill. Open-cell foam should not be used below ground level because it can absorb water. Any water leaks or moisture problems in the basement have to be fixed first, and in finished or living space the foam must be covered with a code-approved thermal barrier such as 1/2-inch drywall.
Do I need a separate vapor barrier with closed-cell spray foam?
At about 2 inches thick, closed-cell foam is rated under 1 perm, which makes it a Class II vapor retarder under the residential building code (0.1 to 1.0 perm). That is not quite a Class I "vapor barrier" like polyethylene sheeting (0.1 perm or less), but it is low enough that most Edgartown walls don't need a separate plastic layer. Open-cell foam is vapor-permeable, at roughly 5 to 10 perms at 5 inches, so it may need a separate vapor retarder depending on the wall design.
Sources: U.S. DOE Building America Spray Foam Guide and Building America Solution Center; DOE Energy Saver; International Residential Code R316 and vapor retarder classes; Mass.gov ice dam guidance.
Older Homes, Crawl Spaces and More: Spray Foam Questions in Edgartown
Is spray foam good for soundproofing?
It helps with sound that leaks through gaps, because foam seals the cracks and openings that let airborne noise in. Open-cell foam is softer and absorbs more sound than closed-cell. It is not a full soundproofing system on its own - walls facing heavy traffic usually also need added mass, such as an extra layer of drywall, for a big reduction.
Can spray foam be added to the finished walls of a Edgartown home?
Often, yes - but usually not with the same spray foam used on open framing. The Department of Energy lists foamed-in-place insulation and blown-in loose fill such as dense-pack cellulose as options for enclosed existing walls; both go in through small holes that are patched afterward. Standard two-part spray foam is sprayed into open cavities, so it fits best when walls are already open during a remodel, or at rim joists, attics and basements you can reach. What is already in the wall, and whether it has had moisture problems, decides which method is right.
Will spray foam cause moisture or mold problems in my Edgartown home?
Not when the assembly is designed for our cold climate. Foam does not fix liquid water, so roof, plumbing and foundation leaks have to be repaired first. Closed-cell foam slows vapor and, at the right thickness, keeps the inside face of the sheathing warm; DOE's Building America guide calls for at least 1.5 inches of closed-cell in cold-climate hybrid walls for that reason. Open-cell foam lets vapor pass, so the wall needs a drying path or a separate vapor retarder depending on the design.
What is the best way to insulate a crawl space in Edgartown?
DOE's Building America guidance favors an unvented, insulated crawl space: insulate the perimeter walls instead of the floor above, cover the ground with sealed 6-mil polyethylene, and provide a drying method such as a small exhaust fan or conditioned air supply (at least 1 CFM per 50 square feet of floor area, or 50 CFM). Closed-cell spray foam is a common way to insulate and air-seal those walls and the rim joist. Check with the Edgartown building department on radon, pest and fire-barrier requirements before you start.
Should a homeowner use a spray foam kit?
Small jobs are possible, but the EPA cautions that do-it-yourself applicators are often unaware of the inhalation and skin hazards. EPA describes three product types: one-component foam in cans for small gaps, low-pressure two-component kits for small areas, and high-pressure professional systems that require supplied-air respirators and protective clothing. Whole-wall, attic and basement jobs call for the professional system, and occupants should stay out until the foam has cured and the space is ventilated.
Sources: U.S. DOE Energy Saver (insulation types); DOE Building America Spray Foam Guide and Solution Center (unvented crawlspaces); U.S. EPA (spray polyurethane foam product types).
Insulating Homes in Edgartown
Edgartown is a historic, seasonal town. The state's survey says Edgartown Village keeps a remarkable amount of its 18th- and early 19th-century scale, including Greek Revival whaling-era captains' houses, while Chappaquiddick developed as an estate district and Katama saw later suburban and condominium growth. A 2019 Martha's Vineyard profile found only about 27% of homes were occupied year-round.
Where spray foam helps, and where it needs care
Historic village homes need gentle work: we focus on attics, rim joists and basements and avoid trapping moisture in old walls. Many newer seasonal homes have cathedral ceilings and bonus rooms where spray foam seals and insulates in one step. Salt air and damp crawlspaces call for a careful moisture check before foam goes in.
Permits, code and local programs
Edgartown's Building Department handles all building permits, including additions, alterations and renovations. Edgartown is a Cape Light Compact member town, and the Compact runs the Mass Save energy efficiency programs on Martha's Vineyard.
Edgartown is a Stretch Code community (since July 1, 2021). New homes need a HERS rating of 42 mixed-fuel or 45 all-electric, and renovations or additions over 1,000 sq ft or over 100% of the existing home need HERS 65 / 70. On smaller jobs, the rule to remember is 225 CMR 22 R503.1.1: exposed wall cavities in an alteration must be filled with insulation of at least R-3.7 per inch.
Our Somerville office at 519 Broadway serves Edgartown. After the insulation is in, HEEC can follow up with a blower door test to measure how much air leakage was cut, and a HERS rating if your project needs one for the energy code.
Frequently Asked Questions
What R-value do you get from 2 inches of closed-cell spray foam?
At roughly R-6.5 to R-7 per inch, two inches of closed-cell foam delivers about R-13 — and just as importantly, that layer also air-seals the cavity and provides vapor control. On many Edgartown walls we pair that 2-inch flash with a lower-cost fill to reach the full R-value target economically.
Do I need to insulate to meet the Massachusetts energy code?
Yes. Massachusetts follows the IECC (Climate Zone 5) with the state Stretch Code, which sets minimum R-values for walls, ceilings, floors, and foundations. We make sure your Edgartown project documents and meets those levels.
What R-value is required for spray foam in Massachusetts?
Massachusetts follows Climate Zone 5 requirements. Above-grade walls generally need about R-20 (or R-13 cavity plus R-5 continuous), attics and ceilings call for roughly R-49 to R-60, floors over unconditioned space about R-30, and basement or crawlspace walls around R-15 continuous. We size the foam on every Edgartown project to hit the value your assembly needs to pass code.
How much does spray foam insulation cost?
Cost depends on the foam type, the square footage, and how many inches of thickness the assembly needs, so a garage, an attic, and a whole-home retrofit all price differently. Rather than quote a number that won't fit your home, we assess the Edgartown project and give you a written, itemized estimate. Request a quote and we'll walk you through the options.
What R-value do I need in Edgartown?
In Climate Zone 5, the code targets roughly R-20 (or R-13 + R-5 continuous) in wood-frame walls, up to R-60 in attics, and R-15 continuous on basement walls. The exact number depends on the assembly and project type.
What is the difference between open-cell and closed-cell foam?
Closed-cell foam is denser, delivers about R-6 to R-7 per inch, and acts as an air and vapor barrier — good for rim joists, basements, and roof decks. Open-cell is lighter, about R-3.5 to R-3.8 per inch, vapor-permeable, and often used in walls and attics.
Is Edgartown a Stretch Code town?
Yes. According to the state's adoption list, Edgartown has been a Stretch Code community since July 1, 2021.
Who runs energy efficiency programs in Edgartown?
Edgartown is a Cape Light Compact member town, and the Compact runs Mass Save energy efficiency programs on the island.
How do you reach R-30 in a wall with spray foam?
The most cost-effective route is a flash-and-fill assembly: about 2 inches of closed-cell foam (≈ R-13) against the sheathing, then the rest of the cavity filled with open-cell, dense-pack cellulose, or batt (≈ R-16 to R-18). In a standard Edgartown 2x6 wall that combination lands right around R-30.
Does Mass Save cover spray foam insulation?
Mass Save is a real Massachusetts efficiency program that Edgartown homeowners can explore. It typically funds a no-cost home energy assessment and offers incentives toward weatherization and air sealing; coverage for spray foam specifically can vary and often depends on the assessment, so we help you understand what your project may qualify for.
Mass Save®-Listed HERS Rater
U.S. DOE Efficient New HomeTrusted Partner — Verified
ENERGY STAR®Partner
Phius CertifiedPassive House Verifier
ICCMember★★★★★136 Google
Reviews
The Phius Certified Verifier logo is used under license from Phius.
HERS Ratings in Edgartown, Massachusetts
Home Energy Efficiency Consultants provides Edgartown with certified HERS ratings, blower door and duct leakage testing, and Massachusetts energy-code compliance for new construction, additions, and major renovations — with same-day preliminary reports.
We rate homes across the Commonwealth from our four offices. Reach the one nearest your Edgartown project — Somerville, Framingham, Marlborough, or Everett — or call (617) 501-6788 to schedule a Edgartown rating.
