Spray Foam Insulation Medway MA - Quick Facts
Local energy code in Medway
- Medway is a Stretch Code community - the statewide baseline for new construction and major renovations. IECC Climate Zone 5A.
- Massachusetts has three energy-code levels - base (2021 IECC), Stretch, and Specialized (Opt-In) - and Medway is on the Stretch Code.
Insulation & air sealing in Medway
- Spray foam is one of the fastest ways to hit the 3.0 ACH50 blower door target and the HERS 42/45 scores required in Medway.
- Envelope R-values follow IECC Climate Zone 5A (roughly R-49 to R-60 attic and R-20+ walls).
- Open-cell and closed-cell assemblies are evaluated during HERS plan review; as RESNET raters, not an insulation contractor, we give unbiased guidance on where R-value and air-sealing dollars move your score most.
Mass Save rebates for Medway (2026)
- Better air sealing and insulation move projects into higher Mass Save tiers - up to $25,000 for a new all-electric single-family home and up to $30,000 (Level 2) for all-electric renovations - verified by a RESNET-certified HERS rater.
RESNET-certified · 15,000+ ratings completed · 5.0 stars across 135 Google reviews · (617) 501-6788
Spray Foam Insulation Medway MA
Medway sits in IECC Climate Zone 5A, so a well-insulated, air-sealed home is essential for comfort and cost. We plan and support insulation work on a mix of colonials, capes, ranches, and newer construction.
Which Spray Foam Is Right for Your Project?
Spray foam comes in two families, and the right choice shapes both performance and cost on a Medway project.
Closed-Cell Spray Foam
Dense and rigid at roughly R-6 to R-7 per inch — the highest R-value of common insulation. It also acts as an air and vapor barrier and adds stiffness, making it ideal for rim joists, basements, crawlspaces, and roof decks in Medway homes.
Open-Cell Spray Foam
Lighter and vapor-permeable at about R-3.5 to R-3.8 per inch. It expands to fill irregular cavities, seals air leaks, and dampens sound — a strong choice for interior walls and attics where drying potential matters.
How Insulation Materials Compare
R-value measures resistance to heat flow — higher is better. Here is how the insulation materials used on Medway, Medway projects compare per inch of thickness.
Closed-cell spray foam
The highest R-value of any common insulation; also acts as an air and vapor barrier and adds structural rigidity. Ideal for rim joists, basements, crawlspaces and unvented roof decks.
Fiberglass batts
The most common and economical insulation; must be cut and fitted carefully because gaps and compression sharply reduce real-world performance.
Fiberglass blown-in
Loose-fill for open attic floors; fast to install and settles into an even blanket over large horizontal areas.
Open-cell spray foam
Lighter and vapor-permeable; expands fully to fill irregular cavities, seals air leaks and dampens sound. A common choice for interior walls and vented attics.
EPS rigid board
Expanded polystyrene; the most affordable rigid foam, used for continuous exterior and below-grade insulation.
Wood fiber
Renewable, carbon-storing batts and boards with strong sound dampening and vapor-open performance.
XPS rigid board
Extruded polystyrene; moisture-resistant rigid board common under slabs and on foundation walls.
Polyiso rigid board
The highest-R rigid foam board; foil-faced and used for continuous exterior insulation to stop thermal bridging.
Mineral wool (rock wool)
Dense, naturally fire-resistant and water-repellent batts or boards with excellent sound control; keeps its R-value when wet.
Cellulose (dense-pack)
Recycled paper fiber treated for fire and pests; dense-packs into closed wall cavities, making it ideal for retrofits.
Reaching Stretch-Code R-Values with a Hybrid System
One of the most cost-effective ways to reach a demanding wall R-value is to pair a thin layer of closed-cell foam with a less expensive filler. A first pass of closed-cell is sprayed tight against the sheathing, and the remainder of the cavity is completed with open-cell foam, dense-pack cellulose, or a batt.
The Flash — Closed-Cell
That initial closed-cell pass — placed tight to the sheathing — provides the air barrier and the vapor control the assembly needs, and at about R-6.5 per inch a two-inch layer adds roughly R-13.
The Fill
Whatever depth remains gets finished with an affordable fill — open-cell, cellulose, or batt insulation — to top off the total.
Worked Example — R-30 Wall
For an R-30 target in a standard 5.5-inch bay: pair a 2-inch closed-cell flash (≈ R-13) with about 4.5 inches of open-cell or cellulose (≈ R-17), landing right around R-30.
Because the warm, vapor-tight foam sits on the exterior side, the sheathing never gets cold enough for condensation to form. The one requirement is a closed-cell layer thick enough for Massachusetts' Zone 5 conditions.
MA Code Insulation Levels (Climate Zone 5)
Medway falls in IECC Climate Zone 5A. New and renovated homes must meet these minimum insulation levels under the Massachusetts energy code.
| Assembly | Minimum R-value (Zone 5) |
|---|---|
| Wood-frame walls | R-20, or R-13 cavity + R-5 continuous |
| Ceilings / attics | R-49 to R-60 |
| Floors over unconditioned space | R-30 |
| Basement walls | R-15 continuous or R-19 cavity |
| Crawlspace walls | R-15 continuous or R-19 cavity |
| Slab edge (heated) | R-10, 2 ft deep |
How to Vet a Spray Foam Contractor in Medway
Spray foam involves chemical reactions and strict safety steps, so the installer matters. In Medway, look for a contractor who:
- Knows Massachusetts code, including ignition and thermal barrier requirements
- Follows OSHA safety practices with proper ventilation and respirators during spraying
- Carries general liability and workers’ compensation coverage
- Provides a clear written scope and estimate before starting
- Holds industry credentials such as SPFA (Spray Polyurethane Foam Alliance) training
- Documents R-values and provides what you need for code sign-off
Insulation for Medway Homes
Because Medway sits in Medway and IECC Climate Zone 5A, insulation and air sealing carry a real payback. We match materials and methods to a mix of colonials, capes, ranches, and newer construction so the work lasts and performs.
Common Spray Foam Applications in Medway
Exterior walls
Foam fills stud cavities completely, eliminating the gaps that reduce batt performance.
Bonus rooms & knee walls
Sealing these awkward areas fixes the hot-and-cold rooms common over garages.
Basement & foundation walls
Closed-cell foam controls moisture and adds R-value below grade.
Attics & roof decks
The top source of heat loss; foam on the roof deck creates a conditioned, sealed attic.
Cathedral ceilings
Foam insulates tight roof-line assemblies where batts cannot breathe or fit well.
Crawlspaces
Encapsulating a crawlspace with foam stops ground moisture and cold floors above.
Frequently Asked Questions
What R-value do I need in Medway?
In Climate Zone 5, the code targets roughly R-20 (or R-13 + R-5 continuous) in wood-frame walls, up to R-60 in attics, and R-15 continuous on basement walls. The exact number depends on the assembly and project type.
Does Mass Save cover spray foam insulation?
Mass Save is a genuine Massachusetts efficiency program, and for Medway homeowners it's worth exploring. It typically funds a no-cost home energy assessment and offers strong incentives toward weatherization and air sealing; coverage for spray foam specifically can vary and often depends on the assessment and the insulation type, so we help you understand what your project may qualify for rather than promising a fixed rebate.
Is spray foam safe once it is installed?
Once cured, spray foam is inert and safe. A qualified installer follows manufacturer cure times, ventilation, and — where code requires — an ignition or thermal barrier over the foam.
How much insulation does an attic need?
Massachusetts code targets about R-49 to R-60 in attics. Because attics are usually the biggest source of heat loss, they are often the most cost-effective place to add insulation first.
What is the difference between open-cell and closed-cell foam?
Closed-cell foam is denser, delivers about R-6 to R-7 per inch, and acts as an air and vapor barrier — good for rim joists, basements, and roof decks. Open-cell is lighter, about R-3.5 to R-3.8 per inch, vapor-permeable, and often used in walls and attics.
How do you reach R-30 in a wall with spray foam?
The most cost-effective route is a hybrid, or flash-and-fill, assembly: about 2 inches of closed-cell foam (≈ R-13) against the sheathing for the air seal and vapor control, then the rest of the cavity filled with open-cell foam, dense-pack cellulose, or batt (≈ R-16 to R-18). In a standard Medway 2x6 wall that combination lands right around R-30.
What R-value is required for spray foam in Massachusetts?
Massachusetts sits in Climate Zone 5. Above-grade walls generally need about R-20 (or R-13 cavity plus R-5 continuous), attics roughly R-49 to R-60, floors over unconditioned space about R-30, and basement or crawlspace walls around R-15 continuous. We size the foam on every Medway project to the value your assembly needs to pass code.
What R-value do you get from 2 inches of closed-cell spray foam?
At about R-6.5 to R-7 per inch, two inches of closed-cell foam gives roughly R-13, and that layer also air-seals the cavity and controls vapor. On many Medway walls we pair a 2-inch closed-cell flash with a lower-cost fill to reach the full target economically.
HERS Ratings in Medway, Massachusetts
Home Energy Efficiency Consultants provides Medway with certified HERS ratings, blower door and duct leakage testing, and Massachusetts energy-code compliance for new construction, additions, and major renovations — with same-day preliminary reports.
We rate homes across the Commonwealth from our four offices. Reach the one nearest your Medway project — Somerville, Framingham, Marlborough, or Everett — or call (617) 501-6788 to schedule a Medway rating.
