Yes, in most cases. Massachusetts requires a HERS rating for new residential construction and for large additions or major renovations in communities that follow the Stretch or Specialized Energy Code. A preliminary HERS rating is typically needed for the building permit and a final rating for the certificate of occupancy.
Under the 2025 Massachusetts Stretch Code, new mixed-fuel homes need HERS 42 or lower and all-electric homes 45 or lower; an embodied-carbon credit for low-GWP insulation or concrete adds 3 points. Major additions and Level 3 renovations use separate targets (HERS 65-75) and ADUs 52-58. We confirm the exact path for your Everett project.
Most Massachusetts HERS ratings run from about $600 to $2,500 depending on the size and scope of the project. Call (617) 501-6788 for a free same-day quote for your Everett project.
We offer same-day scheduling and deliver reports in 24-48 hours. Home Energy Efficiency Consultants has completed 15,000+ HERS ratings statewide and holds a 5.0-star rating from 135 Google reviews.
Finding a reliable HERS Rater near Everett, MA isn’t about hiring someone to rubber-stamp paperwork. Energy ratings have real implications: code compliance, project delays, utility costs, and long-term performance of the home. Home Energy Efficiency Consultant delivers precise, standards-driven Home Energy Rating System evaluations that hold up under inspection. If a builder or homeowner wants an honest assessment backed by solid building-science knowledge, that’s exactly what we provide.
Our goal is simple: document the home’s energy efficiency accurately, identify any issues that will trigger code failures, and give clear direction for achieving the required performance level. No vague comments, no guesswork, no avoiding uncomfortable truths. If something doesn’t pass, you’ll know immediately—along with the exact steps needed to correct it.
We conduct complete, RESNET-compliant HERS ratings for new construction and major renovations. Each evaluation combines on-site inspections, diagnostic testing, and energy modeling. You receive accurate documentation that aligns with current Massachusetts code requirements.
Air leakage is one of the biggest contributors to poor home efficiency and failed inspections. Our blower door testing identifies leakage points throughout the building envelope. Instead of generic advice like “improve air sealing,” we point out specific construction flaws and the exact areas where sealing work needs to be redone.
Leaky ductwork destroys efficiency and undermines HVAC performance. Our testing quantifies how much air escapes, isolated by system. We identify the source of the leakage—poor sealing, disconnected joints, improper installation—and provide clear correction steps.
Our energy models reflect real-world performance, not optimistic estimates. You get documentation that building inspectors can trust and that stands up during permitting, construction, and final inspection.
Many builders underestimate how many details get checked during a HERS rating. Insulation levels, installation quality, window performance, ventilation rates, mechanical equipment sizing, duct routing, and multiple building-envelope components must all align with code. We verify these details without glossing over deficiencies. If something is off, we tell you directly.
Energy efficiency requirements in Massachusetts are stricter than in much of the country, especially for municipalities operating under the Stretch Energy Code. Working with a knowledgeable rater protects you from delays, re-inspections, and unnecessary headaches.
Builders and homeowners are often frustrated when raters give unclear comments or don’t explain the root problem. We do the opposite. You get direct explanations and actionable steps. No ambiguity.
Our approach is grounded in the actual requirements of Massachusetts energy codes. We base every recommendation on specific sections of the standard. You’ll always know whether an issue is critical, optional, or an opportunity to improve performance further.
A rating is not useful if the problems are discovered at the final inspection. We routinely catch issues at rough-in stage—insulation gaps, improper air barriers, poorly sealed ducts, ventilation misconfigurations, and design oversights. Correcting these early prevents expensive rework later.
You’re not left guessing between inspections. We walk you through the steps required to reach your target HERS score and stay compliant with the energy code.
A complete HERS evaluation includes dozens of components. Below are some of the core elements we assess in every project near Everett, MA:
This includes insulation type, installation quality, wall assemblies, air barriers, thermal boundaries, and window/door performance. Mistakes in the envelope show up directly in the HERS score.
We examine equipment sizing, efficiency ratings, ventilation systems, and duct configuration. Oversized units, poor duct design, and incorrect airflow rates are common problems.
Proper ventilation is mandatory, especially under Massachusetts codes. We verify flow rates, equipment installation, and compliance with ASHRAE standards.
We evaluate equipment efficiency, distribution systems, and design choices that influence energy use.
We measure whole-house leakage using blower door equipment and provide a clear breakdown of leakage pathways.
We test duct systems under pressure to identify leakage, pressure imbalances, and installation issues before finish stages.
Every one of these elements affects compliance and long-term home efficiency. Cutting corners guarantees problems later.
A HERS rating is only as good as the rater behind it. Many raters rush through the process, give vague feedback, or avoid calling out mistakes to keep the builder “happy.” That approach backfires when inspectors reject the documentation or the home fails testing.
Our approach is direct, technical, and uncompromising.
We evaluate the home exactly as it is—not how the builder hoped it would perform. If a project is on track, we confirm it. If it’s not, we tell you immediately and give you precise instructions to correct the issue.
You get:
If you want a HERS rater who actually improves the build instead of just observing it, you’re in the right place.
Your project needs accurate testing, honest feedback, and documentation that satisfies the building department the first time. Home Energy Efficiency Consultant provides certified HERS rating services built around precision, transparency, and direct communication.
If you need a HERS Rater near Everett, MA, reach out today to schedule testing or request a project review.
Home Energy Efficiency Consultants rates new homes, additions, and major renovations throughout Everett — including Everett Square, Glendale, West Everett, and Woodlawn. Every Everett project is filed with the City of Everett Inspectional Services Department, and we handle the energy model, blower door and duct leakage testing, and the compliance paperwork from start to finish.
We also serve the communities right around Everett, including Malden, Chelsea, Medford, Revere, and Somerville. Our Everett office at 371 Main St is the closest of our four Massachusetts locations — see our Everett office or call (617) 501-6788 to get a Everett rating on the schedule.
Sign up for our newsletter to receive exclusive updates, tips, and insights about energy-efficient building practices, financial incentives, and the latest energy code requirements in Massachusetts.
At Home Energy Efficiency Consultants, we are committed to providing the highest quality energy consulting services to homebuilders, architects, and developers across Massachusetts.
24/7 Support
MA 01702
Business Hr. 08:00-08:30
© 2025, All Rights Reserved.
ENERGY STAR® Partner · U.S. DOE Efficient New Home Partner — Verified · Your Trusted Mass Save® PartnerSame-day HERS ratings & blower door testing across Massachusetts. We respond within hours.
Get My Free Quote →
