Blower Door Testing Raynham MA
Certified blower door testing in Raynham - we measure your home's air-tightness in ACH50, pinpoint leaks, and document a passing result for your building permit.
Air-tightness at a glance
Blower Door Testing Raynham MA
A blower door test is the code-required way to prove how airtight a home in Raynham really is. A calibrated fan depressurizes the house to 50 Pascals so we can measure exactly how much air leaks through the envelope, reported as air changes per hour (ACH50). New construction must reach 3.0 ACH50 or lower, while remodels are allowed up to 5.0 ACH50.
| Project type | Max ACH50 | Notes |
|---|---|---|
| New construction | 3.0 or lower | Mandatory blower-door test under R402.4.1.2 |
| Remodel / alteration | 5.0 | Realistic target for existing assemblies |
| Addition < 1,000 sq ft | Exempt* | May be exempt from testing (R502.3.1) |
| Passive House / Specialized | 0.6 | Whole-building test, Phius/PHI protocol |
*Confirm with your local building department. Requirements per the 2025 MA Stretch Energy Code Technical Guidance.
How Blower Door Testing Works in Raynham
The fan mounts in an exterior doorway and holds the home at a fixed 50-Pascal pressure difference - about what a 20 mph wind would exert. The airflow required to maintain that pressure, in CFM, converts to ACH50 using the home's conditioned volume.
The code converts the result to Q50 (CFM at 50 Pa) with Q50 = (Volume × ACH50) ÷ 60. A 2,700 sq ft home at 2 ACH50 works out to roughly 810 CFM50.
Keeping Heat In During Raynham Cold Spells
Air-leakage heat loss grows with the gap between indoor and outdoor temperature, which is why a drafty home feels worst in a deep freeze. Warm air you have paid to heat escapes high, cold air rushes in low, and the heating system ends up chasing a load that keeps climbing as the temperature drops.
Sealing and verifying the envelope with a blower door test blunts that stack effect. You keep more of the heat you have already produced, cold-floor drafts fade, and the furnace or heat pump can actually hold temperature through the coldest stretches instead of running flat out and falling behind.
Lower heating load
Less infiltration means a smaller winter heat-loss load and equipment that can keep up.
Retain paid-for heat
Warm air stays in the living space instead of escaping out the top of the house.
Steadier comfort
Fewer cold-floor drafts and a temperature that holds between heating cycles.
Where Raynham Homes Leak Air
During depressurization the leaks are exaggerated, making them easy to find. In Bristol County's older housing stock the usual suspects are rim joists, top plates, attic hatches, recessed lights, and penetrations for plumbing and wiring. Coastal and exposed sites feel wind-driven infiltration most, so a tight, verified envelope pays back quickly here.
Best Fit for Projects Like
- Custom and high-performance builds
- Pre-drywall diagnostic testing for builders
- Drafty existing homes seeking targeted air sealing
- Multi-family and townhouse units
- Mass Save incentive and rebate projects
Blower Door Testing Raynham MA Facts
Quiet, fast, non-destructive
A typical single-family blower door test is non-destructive and usually wraps up in well under an hour once setup is complete.
The reference scale
For perspective, a very leaky older home can exceed 11 ACH50, current code sits at 3.0 for new builds, and certified Passive House projects reach 0.2 to 0.6 ACH50.
Ties into ventilation
Because a tight home needs mechanical fresh air, the verified blower-door rate feeds the R403.6 ventilation sizing under ASHRAE 62.2 - air sealing and ventilation are designed together.
Passive House airtightness
On the Specialized Code / Passive House path, whole-building airtightness follows Phius or PHI protocols - often around 0.6 ACH50, roughly ten times tighter than base code.
Trusted for Blower Door Testing Raynham MA
I wanted to express my satisfaction working with this excellent professional. I highly recommend Dominic.
One of the most reliable companies that I've worked with in Somerville, Massachusetts.
Knowledgeable and professional. Highly recommend them if you want a thorough efficiency assessment.
Our Massachusetts Service Locations
Serving clients from our Massachusetts locations in Everett, Somerville, and Framingham.
Everett Location
371 Main St
Everett, MA 02149
Somerville Location
519 Broadway
Somerville, MA 02145
Framingham Location
68 South St
Framingham, MA 01702
FAQ About Blower Door Testing Raynham MA
Where do most leaks occur?
Common culprits are rim joists, top plates, attic hatches, recessed lights, plumbing and wiring penetrations, and gaps around windows and doors.
What documentation do I receive?
You receive the measured ACH50 result on a RESNET/HERS-style report suitable for the building department, plus notes on any sealing performed.
How is ACH50 converted to CFM?
The code uses Q50 = (conditioned volume x ACH50) / 60. For example, a 2,700 sq ft home with 9 ft ceilings at 2 ACH50 equals about 810 CFM50.
What is a blower door test?
It is a diagnostic that measures how airtight a building is. A calibrated fan mounted in a doorway pressurizes or depressurizes the home to 50 Pascals and measures the airflow needed to hold that pressure, which is reported as ACH50.
When in construction should the test be done?
A pre-drywall diagnostic test is ideal for catching leaks while they are easy to reach, followed by a final compliance test near completion.
Will a tighter home lower my heating load?
Yes. Infiltration is one of the largest parts of a winter heat-loss calculation. Reducing leakage directly shrinks the heating load, which can mean right-sized equipment, lower bills, and a home that holds temperature better in cold weather.
Get Started With Blower Door Testing Raynham MA
Book a certified blower door test and get a permit-ready air-tightness report. Call 617-501-6788.
